 |
Here are the finished HS and VS. These were actually built by Drew Martin and I used them to replace my original HS and VS because they were poorly built by the previous owner. Drew did an excellent job of building these parts. |  |
 |
Here is the elevator with trim tab installed. To the right is a closeup of the trim tab installation. |  |
 |
Left: Empennage mounted
Right: Detail showing elevator stop and screw to secure trim tab hinge wire. |
 |
 |
Left: Detail of elevator pivot attachment.
Right: Rudder stops are relatively easy to install. With QB, there's no choice but to use pop rivets. I filled the rivets with microballoons and sanded to improve appearance |
 |